3 LPE Coated Pipe Bend

3 LPE COATED BEND

PIPE BEND / SUPPLIERS OF PIPE BEND | BEND AND FITTING FOR 2/3 LPE – 2/3 LPP ANTI-COROSION COATING / BEND & FITTING FOR SPU – INSULATION COATING / FUSION BONDED EPOXY (FBE) / 3LPE THREE LAYER POLYETHYLENE COATING / THREE LAYER POLYPROPYLENE COATING 3LPP | PIPES AND BENDS MANUFACTURERS & EXPORTERS IN INDIA

PIPE BEND / BEND AND FITTING FOR 3 LPE 3 LPP ANTI-COROSION COATING / BEND & FITTING FOR SPU – INSULATION COATING / FUSION BONDED EPOXY (FBE) / 3LPE THREE LAYER POLYETHYLENE COATING / THREE LAYER POLYPROPYLENE COATING 3LPP | PIPES AND BENDS STOCKHOLDER, SUPPLIER IN MUMBAI (BOMBAY) INDIA

INDIA’S ONE OF THE LARGEST MANUFACTURERS & SUPPLIERS OF PIPE BEND SCH5s PIPE BEND | SCH 10s PIPE BEND | SCH 40s PIPE BEND  | SCH 80s PIPE BEND  | SCH5 PIPE BEND | SCH10 PIPE BEND | SCH 20 PIPE BEND | SCH 30 PIPE BEND | SCH 40 PIPE BEND | STD PIPE BEND | XS PIPE BEND | SCH 60 PIPE BEND | SCH 80 PIPE BEND | SCH 120 PIPE BEND | SCH 140 PIPE BEND | SCH 160 PIPE BEND | SCH XXS PIPE BEND STAINLESS STEEL ASTM A403 PIPE BEND | ALLOY STEEL ASTM A234 PIPE BEND | DUPLEX 2205 PIPE BEND | NICKEL ALLOY 200 /201 PIPE BEND | LOW TEMPERATURE STEEL PIPE BEND | CARBON STEEL PIPE BEND SUPPLIERS IN INDIA

3D Pipe Bend 5D Bend | Seamless Pipe Bend | 2.5D Pipe Bend | 10D Pipe Bend | 22D Pipe Bend | Hot Pipe Bend | Pipe Spool Manufacturers | Long Radius Bend / LR Pipe Bend | Piggable Bend | Hot Pipe Bend | Hot Induction Pipe Bend | U Pipe Bend | J Pipe Bend | Mitered Pipe Bend | Customized Pipe Bend | Stainless Steel Pipe Bend | Duplex Stainless Steel Pipe Bend | Alloy Steel Pipe Bend | Carbon Steel Pipe Bend

BEND AND FITTING FOR 3 LPE 3 LPP ANTI-COROSION COATING

We can apply 3LPE, 3LPP anti-corrosion coating systems designed for subsea production structures. These systems can be coated for bends and fittings. They can be applied in a wide range of thicknesses to meet project requirements for both shallow and deep water applications.

This coating provides excellent long-term anti-corrosion protection for bends in subsea environments and in harsh environments with temperatures up to 140°C (285°F). The two and three-layer polyethylene and polypropylene coating systems are suitable for all the existing anti-corrosion.

END & FITTING FOR SPU – INSULATION COATING

  • They can be applied in a wide range of thicknesses and configurations to meet technical performance designs based on the specific requirements for both shallow and deep water applications.
  • This coating provides superior thermal insulation properties. The adhesion properties of the primer or the FBE result in corrosion protection and resistance to cathodic disbondment.
  • It can be used for thermally insulating fabricated custom parts of subsea production systems for bends. The Kanak Metal can be applied for technical performance designs based on the specific requirements of each project

FUSION BONDED EPOXY (FBE)

Fusion Bonded Epoxy (FBE) is an excellent anti-corrosion coating for oil and gas pipelines because its strong adhesion to steel brings about superior long term corrosion resistance and protection of pipelines operating smoothly at required temperatures during their designed life.
Also, the excellent resistance to corrosion of FBE coating helps to reduce the total cost of cathodic protection during the operation of the pipeline.

Capability/Property
Minimum Pipe Diameter 60.3 mm (2”)
Maximum Pipe Diameter 1219.2 mm(48”)
Minimum Pipe Length 9.5 m
Maximum Pipe Length 12.7 m
Maximum Recommended Operating Temperature

(THREE LAYER POLYETHYLENE COATING)

Three layer polyethylene coating (3LPE) is a multilayer coating composed of three functional components: a FBE primer, a copolymer adhesive and an outer layer of high density polyethylene to provide excellent corrosion protection and mechanical protection for oil & gas pipelines at operating temperature up to 85oC.
The 3LPE System achieves superior long term corrosion resistance and excellent mechanical protection for small and large diameter pipelines operating at high temperature thanks to strong adhesion of FBE to steel and the tough outer layer of high density polyethylene.The 3LPE system can be applied in a wide range of thicknesses to meet project specifications and requirements.

Capability/Property

Minimum Pipe Diameter 60.3 mm (2”)
Maximum Pipe Diameter 1219.2 mm (48”)
Minimum Pipe Length 9.5 m
Maximum Pipe Length 12.7 m
Minimum/Maximum Recommended Operating Temperature
(Onshore)
-20°C đến 65°C(-4°F đến 149°F)
Minimum/Maximum Recommended Operating Temperature
(Offshore)
-20°C đến 85°C(-4°F đến 185°F)

THREE LAYER POLYPROPYLENE COATING

Three layer polypropylene coating (3LPP) is a multilayer coating composed of three functional components: a FBE primer, a copolymer adhesive and an outer layer of polypropylene to provide excellent corrosion protection and mechanical protection for oil & gas pipelines at operating temperature up to 140oC.
The 3LPP System achieves superior long term corrosion resistance and excellent mechanical protection for small and large diameter pipelines operating at high temperature thanks to strong adhesion of FBE to steel and the tough outer layer of polypropylene.The 3LPP system can be applied in a wide range of thicknesses to meet project specifications and requirements.

Capability/Property
Minimum Pipe Diameter 88.9 mm (3”)
Maximum Pipe Diameter 1219.2 mm (48”)
Minimum Pipe Length 9.5 m
Maximum Pipe Length 12.7 m
Minimum/Maximum Recommended Operating Temperature

(Onshore)

 -20°C đến 110°C (-4°F to 230°F)
Minimum/Maximum Recommended Operating Temperature

(Offshore)

-20°C đến 140°C (-4°F to 284°F)

Coated Bends / Coating Pipe Bends
3D Bend, Stainless Steel ASTM A234, A403 Coated Bends

Coated Bends / Coating Pipe Bends
Carbon Steel 5D Pipe Bend, SCH 5-SCH 160 Fusion-bonded epoxy (FBE) Coating

Coated Bends / Coating Pipe Bends
ASTM A860 Carbon Steel 7D Bend, 1/2-72 Inch polyethylene Coating Bends

Coated Bends / Coating Pipe Bends
3L HDPE 5D Bend, Size 36 Inch, API 5L X60 Coated Bends Supplier Exporters India

A53 GR.B 6D Bend, ANSI B16.49, 20IN, SCH 60, 30 Degree Coated Bends

Coated Bends / Coating Pipe Bends
ASTM A53 GR.B Carbon Steel Bend, ANSI B16.49, 26IN, 30 Degree Internal coatings Bend

Coated Bends / Coating Pipe Bends
ANSI B16.49 90D Bend, API 5L GR.B PSL2, DN250, SCH 40, 5D Coated Bends

Coated Bends / Coating Pipe Bends
90 Degree Mitred Bend, ASTM A234 WPB, DN750, AWWA C208 Coated Bend

Coated Bends / Coating Pipe Bends
BW End Bend, ASTM A234 WPB, Black Internal Coating Bend

Coated Bends / Coating Pipe Bends
90° Pipe Bend, ASTM A234 WPB, 12 Inch mirror coating bend

Coated Bends / Coating Pipe Bends
90 Degree Miter Bend, 1.5D, ASME B16.9, BW, 90IN Black coating bend

Coated Bends / Coating Pipe Bends
1.5D Miter Bend, API 5L Gr. B, 45D, 72 Inch, BW Coated bend

Pipe bend, Bend pipe, Pipe bending, ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches.

Bends

DN – Nominal Diameter
D – Outside Diameter
T – Wall Thickness
R – Bending radius
α – Bending angle
B – Straight lengths for each end
L – Length of bend

Key Specifications/Special Features:

Bending radius(R): R=3D, 4D, 5D, 6D, 7D, 8D, 9D, 10D, 12D
Bending angle (θ):15°, 30°, 45°, 60°, 90°, 135°, 180°
Straight Length (L): The length between two ends general from 300mm-1500mm
Outer diamete(D): D≤1800mm
Wall thickness(T): T≤120mm
Eend bevel: according to the bevel of welding pipe fittings construction